Blog Linux Rocky Linux
22. February 2022

RHEL 8 / CentOS 8 enable SSH service

The following article will explain how to install and start SSH service on RHEL 8 / CentOS 8 system. SSH is a client-server service providing secure encrypted connections over the network connection. Step 1: install the openssh package: Step 2: Start the OpenSSH service by executing the following command: Step 3: Check the status of the sshd service: Step 4: Enable the SSH service to start […]

Advanced Tutorials Blog Debian
18. February 2022

How to Update to PHP 8.1 for WordPress Site on Debian 10 / 11

In this article I am going to show you how I managed to update to PHP 8.1 for my WordPress Site. I am running this WordPress site on top of Debian 10. I had this notification on the WordPress dashboard telling that I should upgrade my PHP to the latest version. I was running PHP 7.3. As you notice on the picture above, PHP Update […]

Blog Linux Rocky Linux
15. February 2022

How to configure a static IP address on RHEL 8 / CentOS 8 Linux

There are many cases in which we may want to set a static IP for a network interface. In Red Hat Enterprise Linux 8, network interfaces are managed by the NetworkManager daemon, so to change a network interface settings we must somehow interact with it. In this tutorial we will see how can we set a static IP address, gateway and dns server for a NIC. […]

Advanced Tutorials Blog Debian
12. February 2022

Install and Configure GitLab CE on Debian 10 / 11

This guide will walk you through the steps to Install GitLab CE on Debian 10/11. GitLab Community Edition (CE) is an open-source application for hosting Git repositories in your own infrastructure. With GitLab you can do project planning and source code management to CI/CD and monitoring. GitLab has evolved to become a complete DevOps platform, delivered as a single application. The next sections will cover the steps to be […]

Advanced Tutorials Blog Debian
10. February 2022

Configure Postfix MTA as Send-Only on Debian 10 / 11

In this guide we’ll look at how you can configure Postfix MTA as a send-only SMTP server on Debian 10/11, meaning it doesn’t receive and process emails. Its job is only to act as Local mail transfer agent. Postfix is a popular open source Mail Transfer Agent (MTA) used in Linux and Unix environments. A send only mail server is useful especially when used in scripting, […]

Advanced Tutorials Blog Rocky Linux
28. January 2022

How to install and configure Pritunl VPN server on CentOS Stream 8

Pritunl VPN is one of the most secure open source VPN tools that are currently available for multi-cloud VPN peering. Pritunl VPN server uses MongoDB and can be deployed on any cloud infrastructure. Pritunl VPN Server supports OpenVPN and Wireguard. The VPN operates in a server-client architecture in such a way that the clients connect to the remote VPN server and routing is handled by […]

Blog VMware
27. January 2022

How to change E1000 into VMXNET3 vNIC on a Windows VM

No matter what the situation, there may be a requirement to change the vNIC of a VM from E1000 to VMXNET3. In my case I have changed my whole network infrastructure to 10 Gbit, Linux VMs are easy to migrate but Windows VMs are a little bit problematic, so I want to show you with this example how it works. Using the VMXNET Generation 3 (VMXNET3) […]

Blog Home Lab
25. January 2022

BIG DISASTER @ irgNET Datacenter

Well I think the title is telling a lot. Unfortunately, in my main server the RAID 5 array has drifted apart due to 2 defective HDDs. First I got the information from iLO Advanced, the OnBoard Management solution of HPE, that one hard disk failed. Then I went to Datacenter 01 and exchanged the defective disk for a new one. During the rebuild, another disk […]

Blog HPE
21. January 2022

How to Update HPE NC550SFP 2.x Firmware

For the next Home Lab update, I decided to increase my network infrastructure to 10Gbit. For this, I picked out VMware 7.0 U3 compatible HPE NC550SFP CNAs for a small amount of money. However, these were at a firmware level beyond the Stone Age and were not recognized by either the HPE DL380p Gen8 or ML310e Gen8 v2 and I had no link. So I […]

Basic Tutorials Blog
20. January 2022

How to Check a file with MD5 or SHA-256 Checksum on Windows

When downloading files for patching or drivers you may need to verify the file is complete.  This can be done by verifying the MD5 checksum from the steps below on your PC. 1. Open the Windows command line. Press Windows + R, type cmd and press Enter. 2. Go to the folder that contains the file whose MD5 checksum you want to check and verify. Command: […]